Parts  Honeywell   2CPSC1A1A

2CPSC1A1A Honeywell


Stock Qty: 0





Prefer to order through one of our trained sales representatives?

1-800-663-6576
[email protected]
Monday-Friday, 8:00am-4:30pm Pacific

We accept Visa, Mastercard and American Express on domestic orders (USA and Canada)


Description

Limit Switch-OT


2CPSC1A1A
Representative picture
HONEYWELL logo

Tech Specs


Contact MaterialGold
Housing MaterialZinc Die-Cast
RoHSNon-Compliant

Series Description

The 2CPS Cable Pull Safety Switch provides readily accessible emergency stop over a long, linear distance. It is a cost-effective means of providing this emergency stop signal compared to multiple emergency stop push buttons. (Cable Pull Safety Switches are not, however, to be used as a means of personnel safeguarding. They may be used to prevent further injury or damage to equipment when used for emergency stop signaling.) The 2CPS Series Cable Pull Safety Switch is designed to provide emergency stop protection for exposed conveyor lines. The internal mechanism latches on both slackened cable (push) and pulled cable. This capability enhances productivity by eliminating nuisance stops due to variations in temperature, stretch of cable over time, and other application variables. A line in the midpoint of the cable tension window indicates proper cable tension, providing easy and intuitive set-up. The direct acting switch contacts are held closed when the actuating cable is under proper tension and the reset knob is set to RUN. When the actuating cable is pulled, slackened or broken, a cam positively opens the NC (Normally Closed) switch contacts. The snap action, trip operation causes the switch contacts to change state and mechanically latch almost simultaneously when the cable is pulled, slackened or broken. The NC switch contacts remain open until the 2CPS is reset by properly tensioning the cable and manually rotating the reset knob. When the direct acting switch contacts open, the auxiliary contacts also actuate (open contacts close and closed contacts open). The auxiliary contacts are electrically isolated from the direct acting switch contacts. These NO (Normally Open) contacts may be used for monitoring or signaling. The 2CPS complies with: Low Voltage Directive 73/23/EEC, as amended by directive 93/68/EEC; Machinery Directive 98/37/EEC only as the directives relate to the components being used in a safety function; IEC/EN60947-1; IEC/EN60947-5-1; IEC/EN60947-5-5; UL, CE, CSA, SIL 3 capable.


Features

  • Positive opening operation of normally closed contacts
  • Choice of 2NC/2NO or 3NC/1NO contact configurations
  • Maximum cable length in a single direction is 76 m (250 ft) for a combined length of 152 m (500 ft) in dual directions
  • Choice of three actuator configurations
  • Removable contact block version available
  • Large wiring cavity with straight-through wiring
  • 24 Vdc or 120 Vac bright, multi-cluster LED status indicator light available
  • Gold-plated contacts are standard
  • Die-cast zinc housing
  • Optional hardware packs available
  • UL, CE, CSA, SIL 3 capable

Typical Applications

  • Long conveyor systems found in warehouses and distribution centers
  • Conveyor systems having a high amount of vibration
  • Conveyor systems that experience wide temperature swings
  • Long conveyor systems where easy through wiring, or highly visible trip status is required
  • Perimeter guarding where hosedown conditions are present

About

The Honeywell part 2CPSC1A1A is distributed by Electrol. The product that you are looking to replace may be brand labeled Microswitch, Hobbs, Honeywell, Data Instruments, Pepperl-Fuchs, Sensym, Senasys, Sensotec or Honeywell-Yamatake, all of which are trade names or previous joint ventures between Honeywell and other partners. The Micro Switch brand is a trade name of Honeywell Sensing & Control headquartered in Freeport Illinois and with manufacturing facilities worldwide including the USA, Mexico, France, Germany, the UK, China and Korea. Electrol has been a distributor of Micro Switch products since 1970.

Honeywell Sensing & Control is a world leader in electro-mechanical switching devices for industry, aerospace, medical and defense. The product line up now also includes sensors for pressure, force, humidity and temperature. Electrol stocks a broad range of Honeywell products for immediate shipment including switching devices for hazardous locations, hermetically sealed switches, pressure transducers and wide range of limit switches for virtually every application.


Stock Qty: 0





Prefer to order through one of our trained sales representatives?

1-800-663-6576
[email protected]
Monday-Friday, 8:00am-4:30pm Pacific

We accept Visa, Mastercard and American Express on domestic orders (USA and Canada)



Frequently viewed with this item...

2CPSA1A3 MICRO

CABLE PULL SWITCH

View

2CPSA1B1A MICRO

CABLE PULL SAFETY LIMIT SWITCH

View

201LS1 MICRO

LIMIT SWITCH

View