Parts  Honeywell   927FLZ74802

927FL-Z748-02 Honeywell


Stock Qty: 0





Prefer to order through one of our trained sales representatives?

1-800-663-6576
[email protected]
Monday-Friday, 8:00am-4:30pm Pacific

We accept Visa, Mastercard and American Express on domestic orders (USA and Canada)


Description

Eight channel interface module sinking (NPN) N.O.


927FL-Z748-02
Representative picture
HONEYWELL logo

Series Description

The interface card 927FL-Z748-02 monitors the state of up to 8 Honeywell railwheel sensors (RDS80001/RDS80002 Series) simultaneously, as well as the wires connecting them to the interface card. A green and a red LED for each sensor permits visual inspection of the sensor output and highlights any sensor fault condition. All inputs and outputs are protected against transients and overvoltage. Sensor output from the RDS80001/RDS80002 Series is a digital low current output, and the interface card converts this to an open collector NPN output. Operation Inputs to the card use a 16 Vdc supply voltage. The card can handle up to eight sensors. Unused sensor inputs should have a 1k resistor connected to prevent the LEDs indicating a sensor fault. A lamp test input allows LEDs to be checked. This is achieved by applying power to the input. Outputs are NPN, with one output for each sensor. Each output can sink up to 100 mA when the sensor corresponding to that output detects a wheel. Installation The interface card is produced as a single European board (100 mm x 160 mm) with a 64 pole DIN connector (DIN 41612 C 64 POL). Pin connection details are given on circuit schematic. These refer to the 'A' and 'C' terminals marked on the connector.


Features

  • Converts the output of the RDS80001/RDS80002 Series sensor to open collector NPN output
  • Suitable for up to 8 sensors
  • LED indication of sensor status
  • Supplied as standard European board 100 mm x 160 mm
  • Enables compatibility with a wider range of equipment
  • Saves on space and lowers average interface cost
  • Clearly shows sensor detection and fault status
  • Easy to install and connect

Typical Applications

  • Used with RDS80001/RDS80002 Series Railwheel proximity sensors in standalone applications
  • Convert 2-wire DC N.C. output to 3-wire DC N.O. output

About

The Honeywell part 927FL-Z748-02 is distributed by Electrol. The product that you are looking to replace may be brand labeled Microswitch, Hobbs, Honeywell, Data Instruments, Pepperl-Fuchs, Sensym, Senasys, Sensotec or Honeywell-Yamatake, all of which are trade names or previous joint ventures between Honeywell and other partners. The Micro Switch brand is a trade name of Honeywell Sensing & Control headquartered in Freeport Illinois and with manufacturing facilities worldwide including the USA, Mexico, France, Germany, the UK, China and Korea. Electrol has been a distributor of Micro Switch products since 1970.

Honeywell Sensing & Control is a world leader in electro-mechanical switching devices for industry, aerospace, medical and defense. The product line up now also includes sensors for pressure, force, humidity and temperature. Electrol stocks a broad range of Honeywell products for immediate shipment including switching devices for hazardous locations, hermetically sealed switches, pressure transducers and wide range of limit switches for virtually every application.


Stock Qty: 0





Prefer to order through one of our trained sales representatives?

1-800-663-6576
[email protected]
Monday-Friday, 8:00am-4:30pm Pacific

We accept Visa, Mastercard and American Express on domestic orders (USA and Canada)



Frequently viewed with this item...

9243101 MICRO

TRANSDUCER BL 100 PSIS BL100PSBG

View

9243102 HONEYWELL

Pressure Transducers

View

9238220MAS AGASTAT

TIME DELAY RELAY - SOLAR PART 120084-4 TYCO PART 923822OMAS

View