Parts  Honeywell   HOA7730M11

HOA7730-M11 Honeywell


Stock Qty: 0





Prefer to order through one of our trained sales representatives?

1-800-663-6576
[email protected]
Monday-Friday, 8:00am-4:30pm Pacific

We accept Visa, Mastercard and American Express on domestic orders (USA and Canada)


Description

HOA7720/7730 Series Connectorized Transmissive Optoschmitt Sensor, Transistor Output, Plastic Package


HOA7730-M11
Representative picture
HONEYWELL logo

Tech Specs


Forward Voltage5.00 V
Input Current40.0 mA
Output Voltage35.0 V
Number of Pins3
RoHSCompliant

Series Description

The HOA7720/7730 Series consists of an infrared emitting diode facing an Optoschmitt detector encased in a black thermoplastic housing. The photodetector consists of a photodiode, amplifier, voltage regulator and Schmitt trigger with either of two output configurations: Totem pole (HOA7720-M11) Open collector (HOA7730-M11)The totem pole output is well-suited for applications which require fast transition times. The open collector allows the output of the sensor to interface with circuit elements driven by supply voltages other than Vcc supply. The inverting logic provides a high output when the optical path is interrupted, and a low output when the path is clear.The infrared emitting diode is biased internally, eliminating the need for any external circuitry. Interconnection is simplified through the use of the integral Tyco three-pin connector.Both the emitter and detector have a 0.508 mm x 1,78 mm [0.020 in x 0,070 in] vertical aperture. The narrow aperture is ideal for use in applications in which the maximum rejection of ambient light is important, and the maximum position resolution is desired.The HOA7220/7330 series employ plastic molded components. Housing material is opaque polycarbonate. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol.


Features

  • Direct TTL interface
  • No interface circuits required
  • Inverting logic
  • Two output options
  • High resolution
  • 3.00 mm [0.118] slot width
  • Integral 3-pin connector

Typical Applications

  • Industrial:
  • Flag presence/absence detection
  • Edge detection
  • Rotary/linear encodersMedical:
  • Edge sensing for labels and paper
  • Needle presence/absence detection
  • End of motion/travel sensing
  • Rotary/linear encoders

About

The Honeywell part HOA7730-M11 is distributed by Electrol. The product that you are looking to replace may be brand labeled Microswitch, Hobbs, Honeywell, Data Instruments, Pepperl-Fuchs, Sensym, Senasys, Sensotec or Honeywell-Yamatake, all of which are trade names or previous joint ventures between Honeywell and other partners. The Micro Switch brand is a trade name of Honeywell Sensing & Control headquartered in Freeport Illinois and with manufacturing facilities worldwide including the USA, Mexico, France, Germany, the UK, China and Korea. Electrol has been a distributor of Micro Switch products since 1970.

Honeywell Sensing & Control is a world leader in electro-mechanical switching devices for industry, aerospace, medical and defense. The product line up now also includes sensors for pressure, force, humidity and temperature. Electrol stocks a broad range of Honeywell products for immediate shipment including switching devices for hazardous locations, hermetically sealed switches, pressure transducers and wide range of limit switches for virtually every application.


Stock Qty: 0





Prefer to order through one of our trained sales representatives?

1-800-663-6576
[email protected]
Monday-Friday, 8:00am-4:30pm Pacific

We accept Visa, Mastercard and American Express on domestic orders (USA and Canada)



Frequently viewed with this item...

SL1-EK HONEYWELL

Enclosed Basic Switch

More

AML27ABK2AC21BA HONEYWELL

Unsealed OI-PB Switch

More

BZ-R HONEYWELL

Large Basic Switch

More