Parts  Honeywell   SD5610001

SD5610-001 Honeywell


Stock Qty: 0





Prefer to order through one of our trained sales representatives?

1-800-663-6576
[email protected]
Monday-Friday, 8:00am-4:30pm Pacific

We accept Visa, Mastercard and American Express on domestic orders (USA and Canada)


Description

Infrared Sensors


SD5610-001
Representative picture
HONEYWELL logo

Datasheets

SD5610-001


Tech Specs


Case/PackageTO-46
Input Current15.0 mA
Mounting StyleThrough Hole
Number of Channels1
Output Voltage2.40 V
Number of Pins3
PolarityNPN
Rise Time60.0 ns
RoHSCompliant
Size-Diameter26.8 mm
Size-Height257 mm
Supply Current15.0 mA
Supply Voltage (DC)4.50 V (min)
Voltage Rating (DC)16.0 V

Series Description

The SD5600/5610 series is a family of single chip Optoschmitt IC detectors mounted in a TO-46 metal can package. The photodetector consists of a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor with 10 kOhm (nominal) pull-up resistor. Output rise and fall times are independent of the rate of change of incident light. Detector sensitivity has been internally temperature compensated. The TO-46 package is ideally suited for operating in hostile environments. Device Polarity: Buffer - Output is HI when incident light intensity is above the turn-on threshold level. Inverter - Output is LO when incident light intensity is above the turn-on threshold level.


Features

  • TO-46 metal can package
  • 6 &#176 (nominal) acceptance angle
  • High noise immunity output
  • TTL/LSTTL/CMOS compatible
  • Buffer (SD5600) or inverting (SD5610) logic available
  • Mechanically and spectrally matched to SE3450/5450, SE3455/5455 and SE3470/5470 infrared emitting diodes

Typical Applications

  • Ideally suited for use in applications which require ambient light rejection, or in transmissive applications where the interrupter media is semi-transparent to infrared energy. This device also provides high contrast ratio in reflective applications where unwanted background reflection is a possibility.

About

The Honeywell part SD5610-001 is distributed by Electrol. The product that you are looking to replace may be brand labeled Microswitch, Hobbs, Honeywell, Data Instruments, Pepperl-Fuchs, Sensym, Senasys, Sensotec or Honeywell-Yamatake, all of which are trade names or previous joint ventures between Honeywell and other partners. The Micro Switch brand is a trade name of Honeywell Sensing & Control headquartered in Freeport Illinois and with manufacturing facilities worldwide including the USA, Mexico, France, Germany, the UK, China and Korea. Electrol has been a distributor of Micro Switch products since 1970.

Honeywell Sensing & Control is a world leader in electro-mechanical switching devices for industry, aerospace, medical and defense. The product line up now also includes sensors for pressure, force, humidity and temperature. Electrol stocks a broad range of Honeywell products for immediate shipment including switching devices for hazardous locations, hermetically sealed switches, pressure transducers and wide range of limit switches for virtually every application.


Stock Qty: 0





Prefer to order through one of our trained sales representatives?

1-800-663-6576
[email protected]
Monday-Friday, 8:00am-4:30pm Pacific

We accept Visa, Mastercard and American Express on domestic orders (USA and Canada)



Frequently viewed with this item...

SL1-EK HONEYWELL

Enclosed Basic Switch

More

AML27ABK2AC21BA HONEYWELL

Unsealed OI-PB Switch

More

SLF04N6000B6A HONEYWELL

Short LongFellow Linear Position Transducer, 101,6 mm [4.0 in] Electrical Travel, Binder Series 681 Termination, Item Number F56104103

More