Parts  Honeywell   SDP8602002

SDP8602-002 Honeywell


Stock Qty: 0





Prefer to order through one of our trained sales representatives?

1-800-663-6576
[email protected]
Monday-Friday, 8:00am-4:30pm Pacific

We accept Visa, Mastercard and American Express on domestic orders (USA and Canada)


Description

Infrared Sensors


SDP8602-002
Representative picture
HONEYWELL logo

Series Description

The SDP86XX series is a family of single chip Optoschmitt IC detectors molded in a side-looking black plastic package to minimize the effect of visible ambient light. The photodetector consists of a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor with a 10 kOhm (nominal) pull-up resistor. Output rise and fall times are independent of the rate of change of incident light. Detector sensitivity has been internally temperature compensated. Flexibility of use is enhanced by a choice of three different lead configurations; in-line (SDP8601/8611), 0.05 in (1.27 mm) offset pin circle (SDP8600/8610) and 0.10 in (2.54 mm) offset center lead (SDP8602/8612). Device Polarity: Buffer - Output is HI when incident light intensity is above the turn-on threshold level. Inverter - Output is LO when incident light intensity is above the turn-on threshold level.


Features

  • Side-looking plastic package
  • 55 &#176 (nominal) acceptance angle
  • Wide sensitivity ranges
  • TTL/LSTTL/CMOS compatible
  • Buffer (SDP8600/8601/8602) or inverting (SDP8610/8611/8612) logic available
  • Three different lead spacing arrangements
  • Mechanically and spectrally matched to SEP8506 and SEP8706 infrared emitting diodes

Typical Applications

  • Ideally suited for use in applications which require ambient light rejection, or in transmissive applications where the interrupter media is semi-transparent to infrared energy. This device also provides high contrast ratio in reflective applications where unwanted background reflection is a possibility.

About

The Honeywell part SDP8602-002 is distributed by Electrol. The product that you are looking to replace may be brand labeled Microswitch, Hobbs, Honeywell, Data Instruments, Pepperl-Fuchs, Sensym, Senasys, Sensotec or Honeywell-Yamatake, all of which are trade names or previous joint ventures between Honeywell and other partners. The Micro Switch brand is a trade name of Honeywell Sensing & Control headquartered in Freeport Illinois and with manufacturing facilities worldwide including the USA, Mexico, France, Germany, the UK, China and Korea. Electrol has been a distributor of Micro Switch products since 1970.

Honeywell Sensing & Control is a world leader in electro-mechanical switching devices for industry, aerospace, medical and defense. The product line up now also includes sensors for pressure, force, humidity and temperature. Electrol stocks a broad range of Honeywell products for immediate shipment including switching devices for hazardous locations, hermetically sealed switches, pressure transducers and wide range of limit switches for virtually every application.


Stock Qty: 0





Prefer to order through one of our trained sales representatives?

1-800-663-6576
[email protected]
Monday-Friday, 8:00am-4:30pm Pacific

We accept Visa, Mastercard and American Express on domestic orders (USA and Canada)



Frequently viewed with this item...

SL1-EK HONEYWELL

Enclosed Basic Switch

More

AML27ABK2AC21BA HONEYWELL

Unsealed OI-PB Switch

More

BZ-R HONEYWELL

Large Basic Switch

More